PRODUCT BRIEF
This
electromechanical synchronous sensor can be widely used in ordinary wet
water meter, does not change the traditional wet water meter structure,
does not affect the traditional wet water meter measurement accuracy and
sensitivity, water meter calibration cycle only need to replace the
water meter base table; Decode code decoding technology Can
accurately read the mechanical position of the code disc data,
non-traditional photoelectric read water wheel position data, there is
no word round 0 and 9 carry problem, there is no critical state and
fuzzy state, the electronic components installed in a separate sealed
chamber , Waterproof performance of IP68 level, no
light interference problems, the production process is extremely
simple, more suitable for large-scale and standardized production.
Product features
Decimal
code decoder technology, there is no carry problem between 0 and 9 No
word round display, free from external light interference, more accurate
readings, measurement accuracy of 0.1m3 sealed structure, not affected
by the impact of wet environment, water resistance to achieve IP68
grade split design, installation and maintenance easier and simple
After the calibration cycle to replace the water meter base table.
Technical Parameters
Dimensions: 116 * 90 * 67.7mm
Communication: M-BUS bus
Communication speed: 1200BPS / 2400BPS / 4800BPS / 9600BPS
Working voltage: DC36V
Bus pin ESD protection over 10KV
Working current: quiescent current ≤1.4MA
Working current: ≤10MA
Working environment: Temperature: -5 ℃ ~ 80 ℃ Humidity: 0% ~ 95% RH
Communication transmission distance: 300M